Re-namespacing a bit to clear out some fairly old stuff from the top level

oldstuff/map-mash/config/boot.rb

@@ -0,0 +1,111 @@
+# Don't change this file!
+# Configure your app in config/environment.rb and config/environments/*.rb
+require 'thread'
+
+RAILS_ROOT = "#{File.dirname(__FILE__)}/.." unless defined?(RAILS_ROOT)
+
+module Rails
+  class << self
+    def boot!
+      unless booted?
+        preinitialize
+        pick_boot.run
+      end
+    end
+
+    def booted?
+      defined? Rails::Initializer
+    end
+
+    def pick_boot
+      (vendor_rails? ? VendorBoot : GemBoot).new
+    end
+
+    def vendor_rails?
+      File.exist?("#{RAILS_ROOT}/vendor/rails")
+    end
+
+    def preinitialize
+      load(preinitializer_path) if File.exist?(preinitializer_path)
+    end
+
+    def preinitializer_path
+      "#{RAILS_ROOT}/config/preinitializer.rb"
+    end
+  end
+
+  class Boot
+    def run
+      load_initializer
+      Rails::Initializer.run(:set_load_path)
+    end
+  end
+
+  class VendorBoot < Boot
+    def load_initializer
+      require "#{RAILS_ROOT}/vendor/rails/railties/lib/initializer"
+      Rails::Initializer.run(:install_gem_spec_stubs)
+      Rails::GemDependency.add_frozen_gem_path
+    end
+  end
+
+  class GemBoot < Boot
+    def load_initializer
+      self.class.load_rubygems
+      load_rails_gem
+      require 'initializer'
+    end
+
+    def load_rails_gem
+      if version = self.class.gem_version
+        gem 'rails', version
+      else
+        gem 'rails'
+      end
+    rescue Gem::LoadError => load_error
+      $stderr.puts %(Missing the Rails #{version} gem. Please `gem install -v=#{version} rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.)
+      exit 1
+    end
+
+    class << self
+      def rubygems_version
+        Gem::RubyGemsVersion rescue nil
+      end
+
+      def gem_version
+        if defined? RAILS_GEM_VERSION
+          RAILS_GEM_VERSION
+        elsif ENV.include?('RAILS_GEM_VERSION')
+          ENV['RAILS_GEM_VERSION']
+        else
+          parse_gem_version(read_environment_rb)
+        end
+      end
+
+      def load_rubygems
+        require 'rubygems'
+        min_version = '1.3.1'
+        unless rubygems_version >= min_version
+          $stderr.puts %Q(Rails requires RubyGems >= #{min_version} (you have #{rubygems_version}). Please `gem update --system` and try again.)
+          exit 1
+        end
+
+      rescue LoadError
+        $stderr.puts %Q(Rails requires RubyGems >= #{min_version}. Please install RubyGems and try again: http://rubygems.rubyforge.org)
+        exit 1
+      end
+
+      def parse_gem_version(text)
+        $1 if text =~ /^[^#]*RAILS_GEM_VERSION\s*=\s*["']([!~<>=]*\s*[\d.]+)["']/
+      end
+
+      private
+        def read_environment_rb
+          File.read("#{RAILS_ROOT}/config/environment.rb")
+        end
+    end
+  end
+end
+
+# All that for this:
+Rails.boot!

oldstuff/map-mash/config/database.yml

@@ -0,0 +1,22 @@
+# SQLite version 3.x
+#   gem install sqlite3-ruby (not necessary on OS X Leopard)
+development:
+  adapter: sqlite3
+  database: db/development.sqlite3
+  pool: 5
+  timeout: 5000
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  adapter: sqlite3
+  database: db/test.sqlite3
+  pool: 5
+  timeout: 5000
+
+production:
+  adapter: sqlite3
+  database: db/production.sqlite3
+  pool: 5
+  timeout: 5000

oldstuff/map-mash/config/environment.rb

@@ -0,0 +1,41 @@
+# Be sure to restart your server when you modify this file
+
+# Specifies gem version of Rails to use when vendor/rails is not present
+RAILS_GEM_VERSION = '2.3.2' unless defined? RAILS_GEM_VERSION
+
+# Bootstrap the Rails environment, frameworks, and default configuration
+require File.join(File.dirname(__FILE__), 'boot')
+
+Rails::Initializer.run do |config|
+  # Settings in config/environments/* take precedence over those specified here.
+  # Application configuration should go into files in config/initializers
+  # -- all .rb files in that directory are automatically loaded.
+
+  # Add additional load paths for your own custom dirs
+  # config.load_paths += %W( #{RAILS_ROOT}/extras )
+
+  # Specify gems that this application depends on and have them installed with rake gems:install
+  # config.gem "bj"
+  # config.gem "hpricot", :version => '0.6', :source => "http://code.whytheluckystiff.net"
+  # config.gem "sqlite3-ruby", :lib => "sqlite3"
+  # config.gem "aws-s3", :lib => "aws/s3"
+
+  # Only load the plugins named here, in the order given (default is alphabetical).
+  # :all can be used as a placeholder for all plugins not explicitly named
+  # config.plugins = [ :exception_notification, :ssl_requirement, :all ]
+
+  # Skip frameworks you're not going to use. To use Rails without a database,
+  # you must remove the Active Record framework.
+  # config.frameworks -= [ :active_record, :active_resource, :action_mailer ]
+
+  # Activate observers that should always be running
+  # config.active_record.observers = :cacher, :garbage_collector, :forum_observer
+
+  # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+  # Run "rake -D time" for a list of tasks for finding time zone names.
+  config.time_zone = 'UTC'
+
+  # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+  # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}')]
+  # config.i18n.default_locale = :de
+end

oldstuff/map-mash/config/environments/development.rb

@@ -0,0 +1,17 @@
+# Settings specified here will take precedence over those in config/environment.rb
+
+# In the development environment your application's code is reloaded on
+# every request.  This slows down response time but is perfect for development
+# since you don't have to restart the webserver when you make code changes.
+config.cache_classes = false
+
+# Log error messages when you accidentally call methods on nil.
+config.whiny_nils = true
+
+# Show full error reports and disable caching
+config.action_controller.consider_all_requests_local = true
+config.action_view.debug_rjs                         = true
+config.action_controller.perform_caching             = false
+
+# Don't care if the mailer can't send
+config.action_mailer.raise_delivery_errors = false

oldstuff/map-mash/config/environments/production.rb

@@ -0,0 +1,28 @@
+# Settings specified here will take precedence over those in config/environment.rb
+
+# The production environment is meant for finished, "live" apps.
+# Code is not reloaded between requests
+config.cache_classes = true
+
+# Full error reports are disabled and caching is turned on
+config.action_controller.consider_all_requests_local = false
+config.action_controller.perform_caching             = true
+config.action_view.cache_template_loading            = true
+
+# See everything in the log (default is :info)
+# config.log_level = :debug
+
+# Use a different logger for distributed setups
+# config.logger = SyslogLogger.new
+
+# Use a different cache store in production
+# config.cache_store = :mem_cache_store
+
+# Enable serving of images, stylesheets, and javascripts from an asset server
+# config.action_controller.asset_host = "http://assets.example.com"
+
+# Disable delivery errors, bad email addresses will be ignored
+# config.action_mailer.raise_delivery_errors = false
+
+# Enable threaded mode
+# config.threadsafe!

oldstuff/map-mash/config/environments/test.rb

@@ -0,0 +1,30 @@
+# Settings specified here will take precedence over those in config/environment.rb
+
+# The test environment is used exclusively to run your application's
+# test suite.  You never need to work with it otherwise.  Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs.  Don't rely on the data there!
+config.cache_classes = true
+
+# Log error messages when you accidentally call methods on nil.
+config.whiny_nils = true
+
+# Show full error reports and disable caching
+config.action_controller.consider_all_requests_local = true
+config.action_controller.perform_caching             = false
+config.action_view.cache_template_loading            = true
+
+# Disable request forgery protection in test environment
+config.action_controller.allow_forgery_protection    = false
+
+# Tell Action Mailer not to deliver emails to the real world.
+# The :test delivery method accumulates sent emails in the
+# ActionMailer::Base.deliveries array.
+config.action_mailer.delivery_method = :test
+
+# Use SQL instead of Active Record's schema dumper when creating the test database.
+# This is necessary if your schema can't be completely dumped by the schema dumper,
+# like if you have constraints or database-specific column types
+# config.active_record.schema_format = :sql
+
+  config.gem 'rspec-rails', :version => '>= 1.3.2', :lib => false unless File.directory?(File.join(Rails.root, 'vendor/plugins/rspec-rails'))

oldstuff/map-mash/config/initializers/01-settings.rb

@@ -0,0 +1,6 @@
+require 'mc-settings'
+
+Setting.load(
+  :path => Rails.root,
+  :files => ['config/settings.yml']
+)

oldstuff/map-mash/config/initializers/inflections.rb

@@ -0,0 +1,10 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format 
+# (all these examples are active by default):
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end

oldstuff/map-mash/config/initializers/mime_types.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone
+
+Mime::Type.register 'image/png', :png

oldstuff/map-mash/config/initializers/new_rails_defaults.rb

@@ -0,0 +1,19 @@
+# Be sure to restart your server when you modify this file.
+
+# These settings change the behavior of Rails 2 apps and will be defaults
+# for Rails 3. You can remove this initializer when Rails 3 is released.
+
+if defined?(ActiveRecord)
+  # Include Active Record class name as root for JSON serialized output.
+  ActiveRecord::Base.include_root_in_json = true
+
+  # Store the full class name (including module namespace) in STI type column.
+  ActiveRecord::Base.store_full_sti_class = true
+end
+
+# Use ISO 8601 format for JSON serialized times and dates.
+ActiveSupport.use_standard_json_time_format = true
+
+# Don't escape HTML entities in JSON, leave that for the #json_escape helper.
+# if you're including raw json in an HTML page.
+ActiveSupport.escape_html_entities_in_json = false

oldstuff/map-mash/config/initializers/redis_conf.rb

@@ -0,0 +1,8 @@
+require 'erb'
+
+File.open(Rails.root.join('config/redis.conf.erb'), 'r') do |f|
+  tmpl = ERB.new(f.read)
+  File.open(Rails.root.join('config/redis.conf'), 'w') do |conf|
+    conf.write(tmpl.result(binding))
+  end
+end

oldstuff/map-mash/config/initializers/session_store.rb

@@ -0,0 +1,15 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying cookie session data integrity.
+# If you change this key, all old sessions will become invalid!
+# Make sure the secret is at least 30 characters and all random, 
+# no regular words or you'll be exposed to dictionary attacks.
+ActionController::Base.session = {
+  :key         => '_map_mash_session',
+  :secret      => '28f75daa5d26dcf4393a379bca87589d42118d8796f9c32fd5a183e879765c0ba458f1e9803caf5f183ed68d1a107de6f06871353a49bc1e29a758f7ada4c324'
+}
+
+# Use the database for sessions instead of the cookie-based default,
+# which shouldn't be used to store highly confidential information
+# (create the session table with "rake db:sessions:create")
+# ActionController::Base.session_store = :active_record_store

oldstuff/map-mash/config/locales/en.yml

@@ -0,0 +1,5 @@
+# Sample localization file for English. Add more files in this directory for other locales.
+# See http://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+en:
+  hello: "Hello world"

oldstuff/map-mash/config/redis.conf.erb

@@ -0,0 +1,417 @@
+# Redis configuration file example
+
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
+daemonize no
+
+# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
+# default. You can specify a custom pid file location here.
+pidfile /tmp/rails-map-mash-redis/server.pid
+
+# Accept connections on the specified port, default is 6379.
+# If port 0 is specified Redis will not listen on a TCP socket.
+port <%= Setting.redis(:port) %>
+
+# If you want you can bind a single interface, if the bind option is not
+# specified all the interfaces will listen for incoming connections.
+#
+bind 127.0.0.1
+
+# Specify the path for the unix socket that will be used to listen for
+# incoming connections. There is no default, so Redis will not listen
+# on a unix socket when not specified.
+#
+# unixsocket /var/run/redis.sock
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 300
+
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile /tmp/rails-map-mash-redis/server.log
+
+# To enable logging to the system logger, just set 'syslog-enabled' to yes,
+# and optionally update the other syslog parameters to suit your needs.
+# syslog-enabled no
+
+# Specify the syslog identity.
+# syslog-ident redis
+
+# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
+# syslog-facility local0
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
+# Save the DB on disk:
+#
+#   save <seconds> <changes>
+#
+#   Will save the DB if both the given number of seconds and the given
+#   number of write operations against the DB occurred.
+#
+#   In the example below the behaviour will be to save:
+#   after 900 sec (15 min) if at least 1 key changed
+#   after 300 sec (5 min) if at least 10 keys changed
+#   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
+save 900 1
+save 300 10
+save 60 10000
+
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+#
+# Also the Append Only File will be created inside this directory.
+#
+# Note that you must specify a directory here, not a file name.
+dir /tmp/rails-map-mash-redis/
+
+################################# REPLICATION #################################
+
+# Master-Slave replication. Use slaveof to make a Redis instance a copy of
+# another Redis server. Note that the configuration is local to the slave
+# so for example it is possible to configure the slave to save the DB with a
+# different interval, or to listen to another port, and so on.
+#
+# slaveof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
+# When a slave lost the connection with the master, or when the replication
+# is still in progress, the slave can act in two different ways:
+#
+# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
+#    still reply to client requests, possibly with out of data data, or the
+#    data set may just be empty if this is the first synchronization.
+#
+# 2) if slave-serve-stale data is set to 'no' the slave will reply with
+#    an error "SYNC with master in progress" to all the kind of commands
+#    but to INFO and SLAVEOF.
+#
+slave-serve-stale-data yes
+
+################################## SECURITY ###################################
+
+# Require clients to issue AUTH <PASSWORD> before processing any other
+# commands.  This might be useful in environments in which you do not trust
+# others with access to the host running redis-server.
+#
+# This should stay commented out for backward compatibility and because most
+# people do not need auth (e.g. they run their own servers).
+#
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
+# requirepass foobared
+
+# Command renaming.
+#
+# It is possilbe to change the name of dangerous commands in a shared
+# environment. For instance the CONFIG command may be renamed into something
+# of hard to guess so that it will be still available for internal-use
+# tools but not available for general clients.
+#
+# Example:
+#
+# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
+#
+# It is also possilbe to completely kill a command renaming it into
+# an empty string:
+#
+# rename-command CONFIG ""
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limits.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
+
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
+# is reached? You can select among five behavior:
+#
+# volatile-lru -> remove the key with an expire set using an LRU algorithm
+# allkeys-lru -> remove any key accordingly to the LRU algorithm
+# volatile-random -> remove a random key with an expire set
+# allkeys->random -> remove a random key, any key
+# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
+# noeviction -> don't expire at all, just return an error on write operations
+#
+# Note: with all the kind of policies, Redis will return an error on write
+#       operations, when there are not suitable keys for eviction.
+#
+#       At the date of writing this commands are: set setnx setex append
+#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
+#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
+#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
+#       getset mset msetnx exec sort
+#
+# The default is:
+#
+# maxmemory-policy volatile-lru
+
+# LRU and minimal TTL algorithms are not precise algorithms but approximated
+# algorithms (in order to save memory), so you can select as well the sample
+# size to check. For instance for default Redis will check three keys and
+# pick the one that was used less recently, you can change the sample size
+# using the following configuration directive.
+#
+# maxmemory-samples 3
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.aof. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+# When the AOF fsync policy is set to always or everysec, and a background
+# saving process (a background save or AOF log background rewriting) is
+# performing a lot of I/O against the disk, in some Linux configurations
+# Redis may block too long on the fsync() call. Note that there is no fix for
+# this currently, as even performing fsync in a different thread will block
+# our synchronous write(2) call.
+#
+# In order to mitigate this problem it's possible to use the following option
+# that will prevent fsync() from being called in the main process while a
+# BGSAVE or BGREWRITEAOF is in progress.
+#
+# This means that while another child is saving the durability of Redis is
+# the same as "appendfsync none", that in pratical terms means that it is
+# possible to lost up to 30 seconds of log in the worst scenario (with the
+# default Linux settings).
+#
+# If you have latency problems turn this to "yes". Otherwise leave it as
+# "no" that is the safest pick from the point of view of durability.
+no-appendfsync-on-rewrite no
+
+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
+
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running. Redis will complain if the
+# swap file is already in use.
+#
+# The best kind of storage for the Redis swap file (that's accessed at random)
+# is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /var/lib/redis/redis.swap
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
+
+############################### ADVANCED CONFIG ###############################
+
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 512
+hash-max-zipmap-value 64
+
+# Similarly to hashes, small lists are also encoded in a special way in order
+# to save a lot of space. The special representation is only used when
+# you are under the following limits:
+list-max-ziplist-entries 512
+list-max-ziplist-value 64
+
+# Sets have a special encoding in just one case: when a set is composed
+# of just strings that happens to be integers in radix 10 in the range
+# of 64 bit signed integers.
+# The following configuration setting sets the limit in the size of the
+# set in order to use this special memory saving encoding.
+set-max-intset-entries 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+#
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf

oldstuff/map-mash/config/routes.rb

@@ -0,0 +1,7 @@
+ActionController::Routing::Routes.draw do |map|
+  map.resources :maps
+  map.resources :mashes
+  map.resources :mash_tournaments
+
+  map.root :controller => 'mash_tournaments', :action => 'new'
+end

oldstuff/map-mash/config/settings.yml

@@ -0,0 +1,5 @@
+resque_web:
+  port: 15678
+
+redis:
+ port: 16379