box-o-sand/oldstuff/arduino/msaqsg/ch02/LEDSwitch/LEDSwitch.ino

const unsigned int LED_PIN = 13;
const unsigned int BAUD_RATE = 9600;

void ledOn() {
    digitalWrite(LED_PIN, HIGH);
    Serial.println("LED on");
}

void ledOff() {
    digitalWrite(LED_PIN, LOW);
    Serial.println("LED off");
}

void ledBlink() {
    Serial.println("BLINKY TIME");
    for (int i = 0; i < 5; i++) {
        ledOn();
        delay(100);
        ledOff();
        delay(100);
    }
}

void handleInput() {
    int c = Serial.read();

    switch (c) {
    case '1':
        ledOn();
        break;
    case '2':
        ledOff();
        break;
    case '3':
        ledBlink();
        break;
    default:
        Serial.print("Unknown command: ");
        Serial.println(c);
    }
}

void setup() {
    pinMode(LED_PIN, OUTPUT);
    Serial.begin(BAUD_RATE);
}

void loop() {
    if (Serial.available() <= 0) {
        return;
    }

    handleInput();
}